Eifel ISO2858 Standard Horizontal Single Stage Centrifugal End Suction Pump for Building Services
This pump goes above and beyond the ISO 2858 benchmark. Thanks to its refined hydraulic engineering, it achieves superior efficiency with lower power consumption—meaning you get more performance for less energy cost. In fact, it delivers 1.6× the flow and 1.25× the head compared to standard ISO 2858 pumps of the same size, giving you a significant performance edge without upsizing your equipment.
Serie de productos :
EH SeriesNorma aplicable :
ISO2858 StandardCapacidades :
4~1000m3/hCabezas :
2~160mDiámetro de entrada y salida: :
32~200mmVelocidad (r/min) :
1450rpm / 2900rpm (50Hz); 1750rpm / 3500rpm (60Hz)Presión máxima de trabajo :
1.6MPa (standard) ; 2.4MPa(on special request)Temperatura :
-15~80℃(standard) ; 80~120℃(on special request)Eifel High-Efficiency End Suction Centrifugal Water Pump
Performance customization is achieved through impeller diameter trimming. The range is built around four shaft sizes and four bearing housing variants, allowing pumps with identical casings to share key components including shafts, seal assemblies, and impeller mounting hardware—significantly reducing spare parts inventory and simplifying maintenance.
Model Instruction
Highlights
The pumps deliver 1.6 times the flow and 1.25 times the head compared to the matching sizes in ISO 2858.
Material
| Pump Part | Material |
| Casing | Cast Iron |
| Ductile Iron | |
| Impeller | Cast Iron |
| Brass | |
| Bronze | |
| Stainless Steel | |
| Shaft | Carbon Steel |
| Stainless Steel |
Applications
Operating Data
| Design | performance and dimensions referring to the European standard BS EN733 / DIN24255 |
| Structure | horizontal, axial end-suction, single stage, single -suction, volute casing, back pull-out |
| DN(mm) | 50 |
| Flange | DIN2501 PN16 GB/T17241.6 PN1.6 (ANSI, JIS, AS...) |
| Flow Rate(Q) | 6.9~17.3m3/h |
| Head(H) | 5.1~11m |
| Speed | 1450rpm (50Hz) |
| Max. Temperature | 85℃(standard); 120℃(on request) |
| Working Pressure | 1.0MPa standard; 1.6MPa on request |
| Conveying Medium | clean water or liquids similar to clean water in physical property |
Field Charts
This pump goes above and beyond the ISO 2858 benchmark. Thanks to its refined hydraulic engineering, it achieves superior efficiency with lower power consumption—meaning you get more performance for less energy cost. In fact, it delivers 1.6× the flow and 1.25× the head compared to standard ISO 2858 pumps of the same size, giving you a significant performance edge without upsizing your equipment.
LEER MÁS
Esta bomba está diseñada según la norma ISO 2858 y su rendimiento es incluso superior. Su diseño hidráulico superior permite lograr una eficiencia significativamente mayor con un menor consumo de energía. Los caudales son 1,6 veces superiores y la presión 1,25 veces superiores a los de sus tamaños correspondientes según la norma ISO 2858.
LEER MÁS
Esta bomba está diseñada de acuerdo con la norma ISO 2858 y su rendimiento es incluso mejor que el de la norma ISO 2858. Las bombas EH tienen un diseño hidráulico superior, mediante el cual se logran eficiencias significativamente mayores con un menor consumo de energía.
LEER MÁS
IPv6 RED SOPORTADA
Dejar un mensaje
Escanear a WeChat/Whatsapp :
English
Русский
Español
عربي
中文
